1～30 item / All 39 items
MOLDINO Made Japan Industrial Equipment Jimk Original End Mill Panasia Coating Square 2-Flute
This is a carbide end mill with PN coating, co-developed with MOLDINO (formerly Mitsubishi Hitachi Tool Engineering), with the motto of "low price." It excels in wear resistance and is ideal for machining mold materials and component materials with a hardness of HRC 50 or lower.
MOLDINO-made Jimk Original ATH Coating Ball End Mill
This is a ball end mill with ATH coating developed in collaboration with MOLDINO (formerly Mitsubishi Hitachi Tool Engineering) under the motto of "low price." It is capable of machining high-hardness materials from pre-hardened steel to HRC60.
Nichigou Kizai Jimk Original NK End Mill High Helical 4-Flute
This is an original carbide end mill from Nichiko Kizai. It features a TiAlN coating! It is ideal for machining non-ferrous materials such as aluminum and copper, as well as carbon steel, pre-hardened steel, and hardened steel with a hardness of HRC 48 or lower.
Nikko Tool Original NK Ball End Mill (Long Neck)
This is an original carbide end mill from Nichiko Kizai. It features a TiAlN coating! It is ideal for machining non-ferrous materials such as aluminum and copper, as well as carbon steel, pre-hardened steel, and hardened steel with a hardness of HRC 48 or lower.
OSG manufactured original Nikkoki equipment vertical wall processing ultra-hard multi-flute end mill
This is a carbide multi-flute end mill for vertical wall machining, developed in collaboration with OSG, with the motto of "low price" and "high performance." It features WXL coating! It is ideal for machining carbon steel, alloy steel, and stainless steel!
Nikkou Machinery Jimk Original NK End Mill High Helix Radius 4 Flute
Jimk's original NK end mill now features a new radius! A high helical shape with a 43° angle. It is ideal for machining non-ferrous materials such as aluminum and copper, as well as carbon steel, pre-hardened steel, and hardened steel with a hardness of HRC 48 or lower.
Developed a radius end mill based on low rotation and high feed processing technology. Achieved a 30% reduction in lead time!
It can be widely used from rough machining to finishing machining. It is suitable for finishing machining of materials with a hardness exceeding 50 HRC (such as difficult-to-cut materials like HPM38)! Compared to the same series, KC-KMR, it has a stronger twist angle of 55°, which further reduces the impact during cutting. It is effective in machining situations where the tool is prone to chatter, such as when the protrusion length is long!
Achieving overwhelming cost performance! Capable of processing a wide range of materials from raw materials to alloy steel.
We would like to introduce our product, the "The Cut Mill Non-Coated Carbide 2-Flute End Mill." It is capable of processing a wide range of workpieces from raw materials to alloy steel. We have achieved overwhelming cost performance. 【Features】 ■ Ultra-fine particle carbide ■ Groove machining ■ Side machining ■ Helix angle 35° *For more details, please refer to the PDF document or feel free to contact us.
Improved lifespan with TiAlN coating! Capable of processing a wide range of workpieces from raw materials to alloy steel!
Introducing our "The Cut Mill Carbide 2-Flute End Mill." It is capable of machining a wide range of workpieces from raw materials to alloy steel. The TiAlN coating enhances tool life and achieves overwhelming cost performance. 【Features】 ■ Gash land ■ TiAlN coating ■ Ultra-fine particle carbide ■ Groove machining ■ Side machining ■ Helix angle 35° *For more details, please refer to the PDF document or feel free to contact us.
Achieving overwhelming cost performance! Capable of processing a wide range of works from raw materials to alloy steel.
Here is an introduction to our product, the "The Cut Mill Carbide 2-Flute Semi-Long End Mill." It is capable of machining a wide range of workpieces, from raw materials to alloy steel. The TiAlN coating enhances tool life and achieves overwhelming cost performance. 【Features】 ■ TiAlN Coating ■ Ultra-Fine Particle Carbide ■ Groove Machining ■ Side Machining ■ Helix Angle 35° *For more details, please refer to the PDF document or feel free to contact us.
Improved lifespan with TiAlN coating! Capable of processing a wide range of workpieces from raw materials to alloy steel!
Introducing our "The Cut Mill Carbide 4-Flute End Mill." It is capable of processing a wide range of workpieces from raw materials to alloy steel. The TiAlN coating enhances tool life and achieves overwhelming cost performance. 【Features】 ■ Gash land ■ TiAlN coating ■ Ultra-fine particle carbide ■ Groove processing ■ Side processing ■ Helix angle 35° *For more details, please refer to the PDF document or feel free to contact us.
Achieving overwhelming cost performance! Capable of processing a wide range of works from raw materials to alloy steel.
We would like to introduce our product, the "The Cut Mill Ultra Hard 4-Flute Semi-Long End Mill." It is capable of machining a wide range of workpieces from raw materials to alloy steel. The TiAlN coating enhances tool life and achieves overwhelming cost performance. 【Features】 ■ TiAlN Coating ■ Ultra-fine Particle Carbide ■ Groove Machining ■ Side Machining ■ Helix Angle 35° *For more details, please refer to the PDF document or feel free to contact us.
Achieve overwhelming cost performance! High rigidity with a short blade length enables high-efficiency machining.
The Cut Mill's ultra-hard 3-flute end mill 'IC3ALS' for aluminum features a 3-flute design that excels in cutting balance. The cutting edge is polished with diamond grit 1000, achieving a higher quality finish. With a non-coating and pin corner specification that emphasizes sharpness, it allows for high-efficiency machining with a high-rigidity short cutting length. 【Features】 ■ Ultra-fine particle carbide ■ Groove machining ■ Side machining ■ Helix angle 45° *For more details, please refer to the PDF document or feel free to contact us.
Wide range of processing from raw materials to alloy steel is possible! TiAlN coating increases lifespan!
"The Cut Mill Ultra Hard 4-Blade Roughing End Mill" has achieved overwhelming cost performance. It is capable of processing a wide range of workpieces from raw materials to alloy steel. The TiAlN coating also increases tool life. Additionally, the 4-blade design ensures stable processing. 【Features】 ■ Achieves overwhelming cost performance ■ Capable of processing a wide range of workpieces from raw materials to alloy steel ■ Increased tool life with TiAlN coating ■ Stable processing with 4-blade design *For more details, please refer to the PDF document or feel free to contact us.
Achieving overwhelming cost performance! A wide range of processing from raw materials to alloy steel is possible!
The Cut Mill ultra-hard 2-flute ball end mill 'IC2MBV' can process a wide range of workpieces from raw materials to alloy steel. It achieves overwhelming cost performance. The TiAlN coating also increases its lifespan. 【Features】 ■ Achieves overwhelming cost performance ■ Capable of processing a wide range of workpieces from raw materials to alloy steel ■ Increased lifespan with TiAlN coating *For more details, please refer to the PDF document or feel free to contact us.
Compatible with a wide range of steel materials with HRC 50 or lower using TiSiN coating! Suitable for use on high-speed machines!
The Cut Mill's ultra-hard 2-flute ball end mill 'IC2BHT' is compatible with a wide range of steel materials with HRC 50 or below, thanks to its TiSiN coating. It is also suitable for use in high-speed machines. It achieves an exceptionally long lifespan and outstanding cost performance. 【Features】 ■ Compatible with a wide range of steel materials with HRC 50 or below, thanks to the TiSiN coating ■ Suitable for use in high-speed machines ■ Achieves an exceptionally long lifespan and outstanding cost performance *For more details, please refer to the PDF document or feel free to contact us.
The adoption of an eccentric blade shape has dramatically improved surface roughness and edge strength!
The Cut Mill high-hardness ultra-hard two-flute ball end mill 'IC2RBV' processes high-hardness materials effortlessly with its ultra-fine alloy and special coating that offer high wear resistance. By adopting an eccentric blade design, both surface roughness and edge strength have dramatically improved. It is also suitable for use with high-speed machines. 【Features】 ■ Can process high-hardness materials effortlessly ■ Dramatic improvement in surface roughness and edge strength ■ Compatible with high-speed machines *For more details, please refer to the PDF document or feel free to contact us.
With a twist angle of 40°, it has a sharp cutting edge, excellent chip removal, and outstanding cutting performance!
The V-shaped end mill "C-MPE-V" is a multifunctional end mill made from ultra-fine particle carbide material. It can perform V-grooving, chamfering, center drilling, hole drilling, and side machining, all with this one tool. By applying a TiAlN treatment to the ultra-fine particle carbide material, it has significantly improved rigidity and wear resistance, greatly extending tool life. 【Features】 - Capable of V-grooving, chamfering, center drilling, hole drilling, and side machining with this one tool - Sharp cutting edge with a 40° twist angle - Excellent chip removal and outstanding cutting performance - The TiAlN treatment applied to the ultra-fine particle carbide provides high rigidity and excellent wear resistance, significantly enhancing tool life *For more details, please refer to the PDF document or feel free to contact us.
Achieving overwhelming cost performance!
The Cut Mill Non-Coated High-Speed Steel 2-Flute End Mill "IHEM2S" - New size added! ● Demonstrates a wide range of cost performance from general-purpose machines to machining centers! ● Can be widely used for groove, side, and hole machining. * For more details, please refer to the PDF document or feel free to contact us.
Short blade length and overall length, perfect for use on automatic lathes!
The shank diameter for a blade diameter of φ10 or less is φ6 and can be used with an ER11 collet. The new Vc coating offers significantly higher hardness (approximately 3000 HV) and oxidation onset temperature (approximately 800°C) compared to the conventional V1 (TiAlN coating), resulting in even longer tool life. 【Features】 ■ AlTiN coating ■ Ultra-fine particle carbide ■ Groove machining ■ Side machining ■ Helix angle of 35° ■ Gash land *For more details, please refer to the PDF document or feel free to contact us.
Achieving overwhelming cost performance!
The Cut Mill High-Speed 2-Blade Coated End Mill "IHEM2S-S" With the new coating: ● High-speed machining is possible! ● Tool life is significantly increased! ● Demonstrates a wide range of cost performance from general-purpose machines to MC! ● Can be widely used for grooving, side machining, drilling, and more. *For more details, please refer to the PDF document or feel free to contact us.
Improved lifespan with TiAlN coating! Capable of processing a wide range of workpieces from raw materials to alloy steel!
Introducing our "The Cut Mill Carbide 2-Flute End Mill." It is capable of machining a wide range of workpieces from raw materials to alloy steel. The TiAlN coating enhances tool life and achieves overwhelming cost performance. 【Features】 ■ Sharp corners ■ TiAlN coating ■ Ultra-fine particle carbide ■ Groove machining ■ Side machining ■ Helix angle 35° *For more details, please refer to the PDF document or feel free to contact us.
Astonishing "Z"
● The unique cutting edge design enables plunge machining in the Z direction. ● The uneven lead reduces cutting resistance and chatter during machining. ● Excellent chip evacuation. ● Suitable for high-speed machining and heavy cutting.
![[Know-how and Knowledge Introduction] Deriving Optimal Machining Conditions for End Mill Cutting 1](https://image.mono.ipros.com/public/product/image/94d/2000309268/IPROS2717244605112378459.jpg?w=280&h=280)
We will introduce the end mill cutting and processing that the cutting catcher supports.
MIST Corporation, which develops and sells "Cutting Catchers," introduces know-how on end mill cutting processing. 【What is End Mill Cutting?】 End mill cutting refers to metal cutting performed using a solid tool with multiple twisted blades called an end mill. It involves rotating the tool and moving it to perform cutting operations on flat surfaces, walls, grooves, pockets, and freeform surfaces. The "Cutting Catcher" is designed to handle this end mill cutting. 【Framework for Optimizing End Mill Processing Conditions】 ■ Fundamental Analysis: Evaluating the relationship between the cutting edge and the workpiece in a two-dimensional cutting state. ■ Micro Analysis: Analyzing the planar relationship between the rotating cutting edge and the workpiece. ■ Macro Analysis: Analyzing the three-dimensional dynamic geometric relationship considering the twisting state of the end mill blade. ◎ Using the above procedures, optimal values are automatically calculated based on our unique theory. *For more details, please refer to the catalog or feel free to contact us.
MOLDINO-made Jikko Tools Jimk Original End Mill Panasia Coating Square 4 Flute
This is a carbide end mill with PN coating, developed in collaboration with MOLDINO (formerly Mitsubishi Hitachi Tool). It features excellent anti-welding properties and is ideal for machining mold materials and component materials with a hardness of HRC 50 or lower, all while adhering to the motto of "low price."
MOLDINO-made Nikko Tool Jimk Original End Mill Panasia Coat Ball
This is a PN coating end mill developed in collaboration with MOLDINO (formerly Mitsubishi Hitachi Tool) with the motto of "low price." It excels in wear resistance and is ideal for machining mold materials and component materials with a hardness of HRC 50 or lower.
MOLDINO-made Nikkou Tool Jimk Original End Mill ATH Coating Square 2-Flute
This is an ATH coating end mill developed in collaboration with MOLDINO (formerly Mitsubishi Hitachi Tool) with the motto of "low price." It is capable of machining high-hardness materials ranging from pre-hardened steel to HRC60.
MOLDINO Made Japanese Industrial Equipment Jimk Original End Mill ATH Coating Square 4 Flute
This is a carbide end mill with ATH coating, developed in collaboration with MOLDINO (formerly Mitsubishi Hitachi Tool Engineering), with the motto of "low price." It is capable of machining high-hardness materials ranging from pre-hardened steel to HRC60.
Nihon Kōki Zai Jimk Original NK End Mill Square 2-Flute
This is an original carbide end mill from Nichiko Kizai. It features a TiAln coating! It is ideal for machining non-ferrous materials such as aluminum and copper, as well as carbon steel, pre-hardened steel, and heat-treated steel with HRC 48 or lower.
Nikkou Machinery Jimk Original NK End Mill Square 4-Flute
This is an original carbide end mill from Nichiko Machinery. It features a TiAlN coating! It is ideal for machining non-ferrous materials such as aluminum and copper, as well as carbon steel, pre-hardened steel, and heat-treated steel with a hardness of HRC 48 or lower.
